GPx-50 Systems (SCO Unix 3.2.4.2)
TCP/IP Installation Instructions

Prerequisite: MAI Supplement installed (W514833-008)

- login as root
- custom
- Install
- A New Product
- Entire Product
- Insert SW000220 TCP/IP diskette 1
- Continue
- Continue (again)
- Insert diskette 2, 3, and 4 as requested
- Enter serial number (i.e:   sco021867)
- Enter activation key (i.e:  ehshhhmj )
- Press any key to continue
- Install
- A New Product
- Entire Product
- Insert SW000230 LLI diskette
- Continue
- Continue (again)
- Press any key to continue
- Quit
- Yes

- netconfig
- 1 Add a chain
- 2. tcp-ip
- 10.  nat0	Novell NE2000 Ethernet driver, board 0
- y
- Press <Enter>  (IRQ=2/9)
- Press <Enter>  (I/O base address = 300)
- Enter:  rainfair.com  (DOMAIN name)
- Enter:  132.147.160.1  (Internet address)
- Press <Enter>  (netmask = 255.255.0.0)
- Press <Enter>  (broadcast address of all 1's)
- Press <Enter>  (broadcast address = 132.147.255.255)
- n	(do you wish to change any of these values?)
- q	(quit)
- y	(Do you want to relink the kernel ?)
- y     (Do you want this kernel to boot by default?)
- y	(Do you want the kernel environment rebuilt ?)
- init 6  (reboot)

- Go into multi-user
- login as root
- ping localhost
  Should display:
  64 bytes from localhost (127.0.0.1): icmp_seq ttl=255 time=xx ms
- Press Ctrl-C to stop