                    PC Server System/390 (P/390)
                    ----------------------------

Fix package level 2.4.1                            5/20/98 John A. Hupcey

This package consists of five files that you have just UNZIPed:

   READ2041.ME     These instructions
   README.AWS      General P/390 installation instructions (also in d:\P390)
   P390FIX.CMD     The P/390 Fix install/removal program
   P3902041.FX1    The P/390 fixes at level 2.4.1 (Syslevel 2.04.1)
   P3902041.FX2    (part 2 of the above)

1) This fix package can only be installed on these levels of P/390 Program:
     Version 2.4   (The latest set of diskettes) = Syslevel 2.04
     Version 2.3.3 (The previous fixpack) = Syslevel 2.03.3

   If you run the OS/2 SYSLEVEL command, it will (eventually)
   display the level of P/390 Programs that are installed.
   Look for the one that says d:\P390\SYSLEVEL.AWS.
   It should say "Version x.0y.z  Component ID 7470 & 90"


2) After installing this fix package, the P/390 SYSLEVEL will say
   "Version 2.04.1", but will be at the exact same level of programs as
   version 2.05 (2.5 diskettes) IF you installed on top of a P/390 2.4
   diskette load (or 2.3.2 diskettes plus fixpack P3902033).

   However, if you installed multiple fixpacks to get here, then you MAY
   be missing some of the following new pieces. Download the only the
   ones you need, use PKUNZIP2 to expand the first level into a
   temporary subdirectory or diskette, and install them AFTER applying
   the 2.4.1 fix package.

    a) For S/390 Parallel Channel Adapter (AIB on ARTIC/960).
       ICE2041.ZIP containing:
        -  PARCA    PAC
        -  PARCA    ZIP
        -  INSTICE  CMD   (to install, run this)
        -  ARTIC960 ZIP

    b) For LSA monitor (used with LAN3172 manager).
       LSA2041.ZIP containing:
        -  LSAMON  PAC
        -  LSAMON  ZIP    (to install, just unzip into d:\P390)

    c) For WAN3172 SDLC gateway
       WAN2041.ZIP containing:
        -  WAN3172  PAC
        -  WAN3172  ZIP
        -  SNA3172  PAC
        -  SNA3172  ZIP
        -  INST3172 CMD    (to install, run this)

    d) For Bisync/SDLC on the Multiport Model 2 Adapter (AWSPBS manager)
       PBS2041.ZIP containing:
        -  AWSPBS  PAC
        -  AWSPBS  ZIP    (to install, just unzip into d:\P390)

   You do not need any of the four packages listed above (a, b, c, d)
   UNLESS you have the additional hardware necessary to use them!


3) Make sure the four files from the fix package are in the same place, e.g. D:\
   (do not put them in the \P390 subdirectory; use a root directory).

   Note: If you have downloaded these files on a PC that is NOT the P/390
         PC, then transfer the files to the P/390 PC Server machine using
         diskettes.

4) Make sure you have stopped:
   - Communications Manager   (use CMSTOP)
   - eNetwork PC/3270, if installed (use PCSSTOP)
   - P/390 I/O subsystem      (use End P/390 icon)
   - All other P/390 programs (close the windows)

5) Run the Fix install program:
       P390FIX
   You will be prompted for the drive (d:) where the \P390 subdirectory is
   located. The default is whatever is in CONFIG.SYS SET PATH statement.

   Note: If you are a Personal/370 customer (and have a d:\P370 subdirectory)
         then type:   P390FIX P370

6) Always review the DOC files in the d:/P390 subdirectory for every
   device manager that you are using, to see if anything has changed.

7) Shutdown and reboot OS/2 for changes to take effect.

8) Be sure to test this fix package thoroughly with your applications
   before putting the fix package into production!

-----------------------------------------------------------------------

If you wish to REMOVE this level of service, then run the program
        d:\P390\REGRESS

-----------------------------------------------------------------------

 Getting P/390 Fixes
 -------------------
 P/390 fixes are distributed in two forms:

  1) "Temporary fixes" are distributed to fix individual or related
     problems before a fixpack becomes available. Generally, you would
     apply these fixes only if you were experiencing that problem.

  2) "Fixpacks" are collections of fixes that have been tested together,
     and should generally be applied to all systems.

 P/390 fixpacks are available on each of the following on-line sites:

 Via WorldWideWeb:    http://www.pcco.ibm.com/files.html
                          Search for P390 in the
                          OS/2 Device Drivers file area.

 Via Anonymous FTP:   ftp.pcco.ibm.com
                          login as user anonymous, password=your_id.
                          cd /pub/pccbbs/os2_drivers
                          binary
                          get p390nnnn.zip

 Via Modem:           Call the OS/2 BBS at 919-517-0001. Set Modem to N 8 1.
                           Log in with your name.
                           Go to the File section.
                           Select the OS/2 Device Driver area.
                           Search for P390

 Temporary fixes and fixpacks are made available on the following FTP site:

 ftp://P390.IBM.COM
       Login as user anonymous, password=your_Email_address
       The file readme.txt or readme.htm identifies all available fixes.

-----------------------------------------------------------------------

PROBLEMS FIXED IN FIXPACK P3902041
==================================

See section M. "What's New" in file d:\P390\README.AWS

--> Be sure to read the following if you are using TCP/IP 3270 sessions:
      README.AWS Section B2
      AWS3274.DOC
      LAN3274.DOC

-----------------------------------------------------------------------

PROBLEMS?
========

Don't forget to print and completely read the README.AWS file that is in
the d:\P390 subdirectory on your hard drive after this fix package install
completes. It contains very important P/390 device manager configuration
information.

Problems? Call Marty Ziskind at (800) 633-7437 (USA only) or (914) 435-5222
Don't call us with a problem until you have read README.AWS!
