                    PC Server System/390 (P/390)
                    ----------------------------

Fix package level 2.02.1                            3/14/97 John A. Hupcey

This package consists of three files that you have just UNZIPed:

   READ2021.ME     These instructions
   P390FIX.CMD     The P/390 Fix install/removal program
   P3902021.FIX    The P/390 fixes at level 2.02.1

1) This fix package can be installed on ANY older level of the P/390
   Programs.  This enables P/390 users at ALL earlier levels to upgrade
   to the latest code without installing a new set of "P/390 Program"
   diskettes.  If you have already installed a set of P/390 diskettes
   labeled "VERSION 2.3.2", then you are at the latest level and do not
   need to install this fix package.

   If you run the OS/2 SYSLEVEL command, it will (eventually) display the
   level of P/390 Programs that are installed.  Look for the one that says
   d:\P390\SYSLEVEL.AWS. It should say "Version x.0y.z  Component ID 7470 & 90"

   After installing this fix package, the P/390 SYSLEVEL will say
   "Version 2.02.1", but will be at the same level as 2.03.2 (2.3.2 diskettes)
   EXCEPT you will be missing the following new pieces (download separately):

    a) For S/390 Parallel Channel Adapter (AIB on ARTIC/960).
       ICE2021.ZIP containing:
        -  PARCA    PAC
        -  PARCA    ZIP
        -  INSTICE  CMD   (to install, run this)
        -  ARTIC960 ZIP

    b) For LSA monitor (used with LAN3172 manager).
       LSA2021.ZIP containing:
        -  LSAMON  PAC
        -  LSAMON  ZIP    (to install, just unzip into d:\P390)

    c) For WAN3172 SDLC gateway (MVS & OS/390 only).
       WAN2021.ZIP containing:
        -  WAN3172  PAC
        -  WAN3172  ZIP
        -  SNA3172  PAC
        -  SNA3172  ZIP
        -  INST3172 CMD    (to install, run this)

2) Make sure the three files from the fix pack are in the same place, e.g. D:\

3) Make sure you have stopped:
   - Communications Manager   (use CMSTOP)
   - P/390 I/O subsystem      (use End P/390 icon)
   - All other P/390 programs (close the windows)

4) Run the Fix install program:
       P390FIX
   You will be prompted for the drive (d:) where the \P390 subdirectory
   is located. The default is whatever is in CONFIG.SYS SET PATH statement.

   Note: If you are a Personal/370 customer (and have a d:\P370 subdirectory)
         then type:   P390FIX P370

5) The install program will ask you if you want a new P/390 Folder with
   "new" icons. A second folder will be created alongside your current
   P/390 folder. If you want to use these new icons, you will have to
   customize the icon settings if you previously made changes to the
   original icon settings. If you do not want the new icons, the whole
   folder and icons can be safely deleted.

6) If you are using the LCS3172 manager for TCP/IP, you must add the
   following line to CONFIG.SYS:
      DEVICE=d:/P390/AWSLCSDD.SYS
   where d: is the drive where the P/390 programs are loaded.

7) Always review the DOC files in the d:/P390 subdirectory for every
   device manager that you are using.

8) Shutdown and reboot OS/2 for changes to take effect.

9) Be sure to test this fix pack thoroughly with your applications before
   putting the fix pack into production!

-----------------------------------------------------------------------

If you wish to REMOVE this level of service, then run the program
        d:\P390\REGRESS

-----------------------------------------------------------------------

 Getting P/390 Fixes
 -------------------
 P/390 fixes are distributed in two forms:

  1) "Temporary fixes" are distributed to fix individual or related
     problems before a fixpack becomes available. Generally, you would
     apply these fixes only if you were experiencing that problem.

  2) "Fixpacks" are collections of fixes that have been tested together,
     and should generally be applied to all systems.

 P/390 fixpacks are available on each of the following on-line sites:

 Via WorldWideWeb:    http://www.pcco.ibm.com/files.html
                          Search for P390 in the
                          OS/2 Device Drivers file area.

 Via Anonymous FTP:   ftp.pcco.ibm.com
                          login as user anonymous, password=your_id.
                          cd /pub/pccbbs/os2_drivers
                          binary
                          get p390nnnn.zip

 Via Modem:           Call the OS/2 BBS at 919-517-0001. Set Modem to N 8 1.
                           Log in with your name.
                           Go to the File section.
                           Select the OS/2 Device Driver area.
                           Search for P390

 Temporary fixes are made available on the following FTP site:

 LSCFTP.POK.IBM.COM
       Login as user anonymous, password=your_id.
       cd /pub/p390
       The file read.me identifies all available fixes.

-----------------------------------------------------------------------

CHANGES IN FIXPACK P3902021
===========================

See the "Section M. What's new in version 2.3" in README.AWS.

-----------------------------------------------------------------------

PROBLEMS?
========

Don't forget to print and completely read the README.AWS file that is in
the d:\P390 subdirectory on your hard drive! It contains very important
installation and configuration information.

Problems? Call Marty Ziskind at (800) 633-7437 (USA only) or (914) 435-5222
Don't call us with a problem until you have read README.AWS!
