==========================================================
               bc635PCI LabVIEW 5x driver v1.1
            Developed by B&B Technologies, Inc.
                Copyright 1998 Datum, Inc.
==========================================================


Contents :

1. bc635PCILV51Win9X.exe	-  bc635PCI Windows 95/98 LabVIEW driver   
  		  		for Symmetricom bc63%PCI-U, Time & Frequency Processor board

 
2. bc635pciLV51NT.exe		-  bc635PCI Windows NT LabVIEW driver    
				for Symmetricom bc63%PCI-U, Time & Frequency Processor board


3. bc635PCI LabVIEW Manual	-  bc635PCI LabVIEW Instrument Driver Manual
		  		for Symmetricom bc63%PCI-U, Time & Frequency Processor board


4. Source			- bc635PCI Windows 95/98 & Windows NT LabVIEW driver 
				source code, VIs and SAT code DLLs


==========================================================

This driver only supports one bc635PCI board per system. 
==========================================================
==========================================================

Windows 95/98 Installation Notes:
==========================================================

Installation Notes:

This installation is for Windows 95/98.  There is a separate 
installation for Windows NT.

(1) Do not install the bc635PCI card yet.  You will be 
prompted to later.

(2) Insert the bc635PCI disk1 in a floppy drive.  Choose Run 
from the Start menu. Type A:\setup and press Ok.

(3) The installation program should start within seconds. 
When prompted for a destination directory, you must enter the
path to the LabVIEW directory for Windows 95/98.  
For example:  C:\LABVIEW4.

(4) You must reboot your computer after the installation 
program is done to activate your new software.

(5) Start LabVIEW and run the bc635 System Setup.vi to set 
up the driver software.  DO NOT modify any of the VI's front 
panel controls.  Once the VI executes, close it.  Do not run 
bc635 System Setup.vi while other bc635 VIs are open.

You only need to run bc635PCI System Setup.vi when you first 
install the driver.  The bc635 System Setup.vi is located in 
	...LabVIEW\Instr.lib\bc635sup.llb

If LabVIEW prompts you for a library file (.dll) when it is 
loading any bc635 driver VIs, perform these steps:
	(1) Stop loading bc635 VIs
	(2) Select Edit->Preferences...
	(3) On the Preferences pop up window, select the 
	    Paths option from the list ring.
	(4) Deselect the Use Default checkbox.
	(5) Select VI Search Path from the small list ring.
	(6) On the entry area next to Browse... , type
	    [Drive]:\BBTSAT95 (substitute [Drive] for the 
	    drive letter. For example C.).  
	(7) Press the Insert After button and then press the 
	    OK button.
	(8) Exit and then re-start LabVIEW.  LabVIEW should 
	    be to find all the necessary files.

==========================================================
==========================================================

Windows NT Installation Notes:
==========================================================

This installation is for Windows NT.  There is a separate 
installation for Windows 95/98.

(1) Login into the account you normally work on. Under 
    Windows NT, you must have Administrative privileges to 
    install and run the driver.  Close all applications 
    before starting the installation.

(2) Insert the bc635 disk1 in a floppy drive.  If you are 
    running NT 3.51, choose Run from the file menu on the 
    Program Manager.  Under NT 4.0, choose Run from the 
    Start menu. Type A:\setup and press Ok.

(3) The installation program should start within seconds. 
    When prompted for a destination directory, you must 
    enter the path to the LabVIEW for Windows NT directory.  
    For example:  C:\LABVIEW4.

(4) You must reboot your computer after the installation 
    program is done to activate your new software.

(5) If you have not installed the bc635PCI board into your 
    computer, do so at this time by turning off you machine
    and inserting the bc635PCI card into an available PCI 
    slot.

(6) Start LabVIEW and run the bc635 System Setup.vi to set 
    up the driver software.  DO NOT modify any of the VI's 
    front panel controls.  Once the VI executes, close it.  
    Do not run bc635 System Setup.vi while other bc635 VIs 
    are open.

You only need to run bc635 System Setup.vi when you first 
install the driver.  The bc635 System Setup.vi is located in 
	...LabVIEW\Instr.lib\bc635sup.llb

If LabVIEW prompts you for a library file (.dll) when it is 
loading any bc635 driver VIs, perform these steps:
	(1) Stop loading bc635 VIs
	(2) Select Edit->Preferences...
	(3) On the Preferences pop up window, select the 
	    Paths option from the list ring.
	(4) Deselect the Use Default checkbox.
	(5) Select VI Search Path from the small list ring.
	(6) On the entry area next to Browse... , type
	    [Drive]:\BBTNTSAT (substitute [Drive] for the 
	    drive letter. For example C.).  
	(7) Press the Insert After button and then press the 
	    OK button.
	(8) Exit and then re-start LabVIEW.  LabVIEW should 
	    be to find all the necessary files.
==========================================================

