(PDP--11 Keypad Editor User's Guide) <order_number>(AA--H853C--TC) <abstract>(August 1991) This document tells you how to use your terminal and the PDP--11 Keypad Editor (KED) to write, edit, and inspect any kind of text file and to store that file in one of the volumes on your system. <p> Whether you are a first-time or a long-time user of KED, you should begin with Chapter 1. This document has been completely rewritten to be more tutorial and task oriented. <endabstract> <revision_info>(This document supersedes the <reference>(ked_book), AA--H853B--TC. <condition>(iasrsx) and the <emphasis>(PDP--11 Keypad Editor Release Notes), AA--J692A--TC. <endcondition>) <REVISION_INFO>(Operating System and Version:\<condition>(iasrsx) IAS Version ??? or later, RSX--11M Version ??? or later, RSX--11M--PLUS Version ??? or later, and<endcondition>RT--11 Version 5.6) <ENDTITLE_PAGE> <COPYRIGHT_PAGE> <COPYRIGHT_PAGE_FORMATTING>(CONTROLLED) <PRINT_DATE>(First Printing, March 1980) <PRINT_DATE>(Updated, February 1981) <PRINT_DATE>(Updated, July 1984) <PRINT_DATE>(Revised, August 1989) <PRINT_DATE>(Reprinted, August 1991) <p> The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. <p> Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. <p> Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. <p> Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227--7013. <COPYRIGHT_DATE>(1980, 1981, 1984, 1989, 1991) <line> All rights reserved. Printed in U.S.A. <p> The Reader's Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. <p> The following are trademarks of Digital Equipment Corporation: <comment> ******************** RT converted from .TEX file - added VAX DOCUMENT - bg 9/22/89 ******************** <endcomment> <TABLE> <TABLE_ATTRIBUTES>(SINGLE_SPACED) <TABLE_SETUP>(3\16\16) <TABLE_ROW>(CTS--300 <LINE>DDCMP <LINE>DEC <LINE>DECmate <LINE>DECnet <LINE>DECsystem--10 <LINE>DECSYSTEM--20 <LINE>DECUS <LINE>DECwriter <LINE>DIBOL <LINE>MASSBUS\ MicroPDP--11 <LINE>Micro/RSX <LINE>MicroVMS <LINE>PDP <LINE>P/OS <LINE>Professional <LINE>Q-bus <LINE>Rainbow <LINE>RSTS <LINE>RSX <LINE>RT--11\ RTEM--11 <LINE>UNIBUS <LINE>VAX <LINE>VAXcluster <LINE>VAX DOCUMENT <LINE>VMS <LINE>VT <LINE>Work Processor <LINE> <LINE> <LINE><dec_logo>) <ENDTABLE> <vertical_space>(fill) <document_acknowledgment>(brief) <ENDCOPYRIGHT_PAGE>(S1763) <endfront_matter> <comment> ******** The following text was not used for the August, 1991 reprint. <contents_file> <preface>(-9) <head1>(Conventions) <p> This manual and the <emphasis>(PDP--11 Keypad Editor Reference Card) use the following conventions. Although most of them are the same as the conventions used in other documents for PDP--11 software, the VT100 terminal and the video orientation of the keypad editor require a few changes. <p> The following conventions are used throughout this manual: <table> <table_setup>(2\15) <table_heads>(Convention\Meaning) <table_row>(System prompt\Indicates that the system is ready for you to enter a command. For RT--11, the system prompt is a period (.).) <table_row>(Red print\Indicates the characters typed on the keyboard in examples of commands. Black print in these examples indicates the characters displayed by the system or by the keypad editor.) <table_row>(Uppercase letters <line> (In commands)\Indicate the characters that you must type on the keyboard (see "Lowercase letters" also).) <table_row>(Lowercase letters <line> (In commands)\Indicate the parts of commands or command strings that you must supply (see "Uppercase letters" also).) <table_row>(Underlined letters (In general forms of commands)\Indicate the shortest valid abbreviation of a keypad editor command.) <table_row>(<box>(CTRL/)\Indicates a combination of the control key and another keyboard key. For example, for <box>(CTRL/U) hold down the CTRL key and press the U key.) <table_row>(Square brackets <line> (In general forms <line> of commands)\Enclose an optional term or optional characters (do not type square brackets as part of a command unless the instructions explicitly require them).) <table_row>(Braces\Enclose a list of two or more terms from which you must choose and type one (do not type braces as part of a command).) <endtable> <endpreface> <endfront

(edited 8-Jun) (fm) (PDP--11 Keypad Editor User's Guide) <order_number>(AA--H853C--TC) <abstract>(August 1991) This document tells you how to use your terminal and the PDP--11 Keypad Editor (KED) to write, edit, and inspect any kind of text file and to store that file in one of the volumes on your system. <p> Whether you are a first-time or a long-time user of KED, you should begin with Chapter 1. This document has been completely rewritten to be more tutorial and task oriented. <endabstract> <revision_info>(This document supersedes the <reference>(ked_book), AA--H853B--TC. <condition>(iasrsx) and the <emphasis>(PDP--11 Keypad Editor Release Notes), AA--J692A--TC. <endcondition>) <REVISION_INFO>(Operating System and Version:\<condition>(iasrsx) IAS Version ??? or later, RSX--11M Version ??? or later, RSX--11M--PLUS Version ??? or later, and<endcondition>RT--11 Version 5.6) <ENDTITLE_PAGE> <COPYRIGHT_PAGE> <COPYRIGHT_PAGE_FORMATTING>(CONTROLLED) <PRINT_DATE>(First Printing, March 1980) <PRINT_DATE>(Updated, February 1981) <PRINT_DATE>(Updated, July 1984) <PRINT_DATE>(Revised, August 1989) <PRINT_DATE>(Reprinted, August 1991) <p> The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. <p> Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. <p> Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. <p> Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227--7013. <COPYRIGHT_DATE>(1980, 1981, 1984, 1989, 1991) <line> All rights reserved. Printed in U.S.A. <p> The Reader's Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. <p> The following are trademarks of Digital Equipment Corporation: <comment> ******************** RT converted from .TEX file - added VAX DOCUMENT - bg 9/22/89 ******************** <endcomment> <TABLE> <TABLE_ATTRIBUTES>(SINGLE_SPACED) <TABLE_SETUP>(3\16\16) <TABLE_ROW>(CTS--300 <LINE>DDCMP <LINE>DEC <LINE>DECmate <LINE>DECnet <LINE>DECsystem--10 <LINE>DECSYSTEM--20 <LINE>DECUS <LINE>DECwriter <LINE>DIBOL <LINE>MASSBUS\ MicroPDP--11 <LINE>Micro/RSX <LINE>MicroVMS <LINE>PDP <LINE>P/OS <LINE>Professional <LINE>Q-bus <LINE>Rainbow <LINE>RSTS <LINE>RSX <LINE>RT--11\ RTEM--11 <LINE>UNIBUS <LINE>VAX <LINE>VAXcluster <LINE>VAX DOCUMENT <LINE>VMS <LINE>VT <LINE>Work Processor <LINE> <LINE> <LINE><dec_logo>) <ENDTABLE> <vertical_space>(fill) <document_acknowledgment>(brief) <ENDCOPYRIGHT_PAGE>(S1763) <endfront_matter> <comment> ******** The following text was not used for the August, 1991 reprint. <contents_file> <preface>(-9) <head1>(Conventions) <p> This manual and the <emphasis>(PDP--11 Keypad Editor Reference Card) use the following conventions. Although most of them are the same as the conventions used in other documents for PDP--11 software, the VT100 terminal and the video orientation of the keypad editor require a few changes. <p> The following conventions are used throughout this manual: <table> <table_setup>(2\15) <table_heads>(Convention\Meaning) <table_row>(System prompt\Indicates that the system is ready for you to enter a command. For RT--11, the system prompt is a period (.).) <table_row>(Red print\Indicates the characters typed on the keyboard in examples of commands. Black print in these examples indicates the characters displayed by the system or by the keypad editor.) <table_row>(Uppercase letters <line> (In commands)\Indicate the characters that you must type on the keyboard (see "Lowercase letters" also).) <table_row>(Lowercase letters <line> (In commands)\Indicate the parts of commands or command strings that you must supply (see "Uppercase letters" also).) <table_row>(Underlined letters (In general forms of commands)\Indicate the shortest valid abbreviation of a keypad editor command.) <table_row>(<box>(CTRL/)\Indicates a combination of the control key and another keyboard key. For example, for <box>(CTRL/U) hold down the CTRL key and press the U key.) <table_row>(Square brackets <line> (In general forms <line> of commands)\Enclose an optional term or optional characters (do not type square brackets as part of a command unless the instructions explicitly require them).) <table_row>(Braces\Enclose a list of two or more terms from which you must choose and type one (do not type braces as part of a command).) <endtable> <endpreface> <endfront_matter> <endcomment>