(RT--11 IND Control Files Manual) <order_number>(AA--PDU1A--TC) <abstract>(August 1991) This manual tells you how to create and execute IND control files. <align_char>(#) <endabstract> <revision_info>( Revision/Update Information:\ This is a new manual for programmers; it is a revision #of the IND chapter in the former <emphasis>(RT--11 System User's #Guide). ) <endalign_char> <revision_info>(Operating System:\ RT--11 Version 5.6) <ENDTITLE_PAGE> <copyright_page> <comment> This copyright page works. All you have to do is 1. Edit in the appropriate date in two places (at the print_date and at the copyright_date tags) 2. Put in your book ID number at the endcopyright_page tag. <endcomment> <COPYRIGHT_PAGE_FORMATTING>(CONTROLLED) <PRINT_DATE>(First Printing, August 1991) The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227--7013. <COPYRIGHT_DATE>(1991\Digital Equipment Corporation) <line> All rights reserved. Printed in U.S.A. The Reader's Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. The following are trademarks of Digital Equipment Corporation: CTS--300, DDCMP, DECNA, DECnet, DECUS, DECwriter, DIBOL, MASSBUS, MicroPDP--11, Micro/RSX, PDP, Professional, Q-bus, RSTS, RSX, RT--11, RTEM--11, UNIBUS, VMS, VT, and the DIGITAL logo. <vertical_space>(fill) <document_acknowledgment>(brief) <ENDCOPYRIGHT_PAGE>(S1522) <contents_file> <Preface>(7) <comment>(Place the correct plage number above, when you know what it is) <HEAD1>(Document Structure) This manual is divided into the following three parts and appendix: <list>(unnumbered) <le> Part I, Using IND Control Files, describes how to use the IND command language. <le> Part II, Descriptions of IND Directives, alphabetically describes each IND directive. <le> Part III, IND Error Messages, alphabetically lists and explains each error message. <le> Appendix A, Sample IND Control Files, displays three sample control files. <endlist> <head1>(Audience) This manual is written for those users of the RT--11 operating system who want to program control files. <HEAD1>(Conventions\Conventions) The following conventions are used in this guide. <TABLE> <TABLE_SETUP>(2\15) <TABLE_HEADS>(Convention\Meaning) <TABLE_ROW>(Black print\ In examples, black print indicates output lines or prompting characters that the system displays. For example: <interactive> <s>(.)(BACKUP/INITIALIZE DL0:F*.FOR DU1:WRK) <S>(Mount output volume in DU1:; continue?) (Y) <endinteractive>) <TABLE_ROW>(Red print\ In examples, red print indicates user input.) <TABLE_ROW>( Braces ({ }) \In command syntax examples, braces enclose options that are mutually exclusive. You can choose only one option from the group of options that appears in braces.) <TABLE_ROW>(Brackets ([ ])\ Square brackets in a format line represent optional parameters, qualifiers, or values, unless specified otherwise. ) <TABLE_ROW>(lowercase <line> characters\ In command syntax examples, lowercase characters represent elements of a command for which you supply a value. For example: <code_example> DELETE filespec <endcode_example>) <TABLE_ROW>(UPPERCASE <LINE> characters\ In command syntax examples, uppercase characters represent elements of a command that should be entered exactly as given.) <TABLE_ROW>(<BOX>(RET)\ <box>(RET) in examples represents the <emphasis>(RETURN\smallcaps) key. Unless the manual indicates otherwise, terminate all commands or command strings by pressing <key>(RET).) <TABLE_ROW>(<BOX>(RETURN)\ <box>(RETURN) in the text represents the <emphasis>(RETURN\smallcaps) key.) <TABLE_ROW>(<BOX>(CTRL/<VARIABLE>(x))\ <BOX>(CTRL/<VARIABLE>(x)) indicates a control-key sequence. While pressing the <emphasis>(CTRL\smallcaps) key, press another key. For example: <BOX>(CTRL/C).) <ENDTABLE> <head1>(Associated Documents) <line> Basic Books <list>(unnumbered) <LE> <REFERENCE>(INT_book) <LE> <REFERENCE>(GUI_book) <LE> <REFERENCE>(KED_book) <LE> <REFERENCE>(KEDC_book) <LE> <REFERENCE>(sug_book) <LE> <REFERENCE>(MRM_book) <LE> <REFERENCE>(MAS_book) <LE> <REFERENCE>(MSG_book) <LE> <REFERENCE>(SRN_book) <ENDLIST> <line> Installation Specific Books <list>(unnumbered) <LE> <REFERENCE>(AUT_book) <LE> <REFERENCE>(INS_book) <LE> <REFERENCE>(SYG_book) <ENDLIST> <page> Programmer Oriented Books <list>(unnumbered) <LE> <REFERENCE>(SUM_book) <LE> <REFERENCE>(SML_book) <LE> <REFERENCE>(SSL_book) <LE> <REFERENCE>(SIM_book) <LE> <REFERENCE>(DEV_book) <LE> <REFERENCE>(VFF_book) <LE> <REFERENCE>(DBG_book) <ENDlist> <page> <preface_section>(New and Changed Features) <list>(unnumbered) <le>The <literal>(<)<emphasis>(jobs\smallcaps)>, <literal>(<)<emphasis>(mapped\smallcaps)>, and <literal>(<)<emphasis>(system\smallcaps)> special numeric symbols have been updated to include the RT--11 5.6 monitors. <LE> A new special logical symbol <literal>(<)<emphasis>(mode\smallcaps)> has been added to indicate if the current monitor supports mapping to Instruction and Data space. <endlist> See the <emphasis>(IND Reserved Symbols) section in Chapter 2 for a description of these symbols. <ENDPREFACE> <ENDFRONT

(commandsfm) (RT--11 IND Control Files Manual) <order_number>(AA--PDU1A--TC) <abstract>(August 1991) This manual tells you how to create and execute IND control files. <align_char>(#) <endabstract> <revision_info>( Revision/Update Information:\ This is a new manual for programmers; it is a revision #of the IND chapter in the former <emphasis>(RT--11 System User's #Guide). ) <endalign_char> <revision_info>(Operating System:\ RT--11 Version 5.6) <ENDTITLE_PAGE> <copyright_page> <comment> This copyright page works. All you have to do is 1. Edit in the appropriate date in two places (at the print_date and at the copyright_date tags) 2. Put in your book ID number at the endcopyright_page tag. <endcomment> <COPYRIGHT_PAGE_FORMATTING>(CONTROLLED) <PRINT_DATE>(First Printing, August 1991) The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227--7013. <COPYRIGHT_DATE>(1991\Digital Equipment Corporation) <line> All rights reserved. Printed in U.S.A. The Reader's Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. The following are trademarks of Digital Equipment Corporation: CTS--300, DDCMP, DECNA, DECnet, DECUS, DECwriter, DIBOL, MASSBUS, MicroPDP--11, Micro/RSX, PDP, Professional, Q-bus, RSTS, RSX, RT--11, RTEM--11, UNIBUS, VMS, VT, and the DIGITAL logo. <vertical_space>(fill) <document_acknowledgment>(brief) <ENDCOPYRIGHT_PAGE>(S1522) <contents_file> <Preface>(7) <comment>(Place the correct plage number above, when you know what it is) <HEAD1>(Document Structure) This manual is divided into the following three parts and appendix: <list>(unnumbered) <le> Part I, Using IND Control Files, describes how to use the IND command language. <le> Part II, Descriptions of IND Directives, alphabetically describes each IND directive. <le> Part III, IND Error Messages, alphabetically lists and explains each error message. <le> Appendix A, Sample IND Control Files, displays three sample control files. <endlist> <head1>(Audience) This manual is written for those users of the RT--11 operating system who want to program control files. <HEAD1>(Conventions\Conventions) The following conventions are used in this guide. <TABLE> <TABLE_SETUP>(2\15) <TABLE_HEADS>(Convention\Meaning) <TABLE_ROW>(Black print\ In examples, black print indicates output lines or prompting characters that the system displays. For example: <interactive> <s>(.)(BACKUP/INITIALIZE DL0:F*.FOR DU1:WRK) <S>(Mount output volume in DU1:; continue?) (Y) <endinteractive>) <TABLE_ROW>(Red print\ In examples, red print indicates user input.) <TABLE_ROW>( Braces ({ }) \In command syntax examples, braces enclose options that are mutually exclusive. You can choose only one option from the group of options that appears in braces.) <TABLE_ROW>(Brackets ([ ])\ Square brackets in a format line represent optional parameters, qualifiers, or values, unless specified otherwise. ) <TABLE_ROW>(lowercase <line> characters\ In command syntax examples, lowercase characters represent elements of a command for which you supply a value. For example: <code_example> DELETE filespec <endcode_example>) <TABLE_ROW>(UPPERCASE <LINE> characters\ In command syntax examples, uppercase characters represent elements of a command that should be entered exactly as given.) <TABLE_ROW>(<BOX>(RET)\ <box>(RET) in examples represents the <emphasis>(RETURN\smallcaps) key. Unless the manual indicates otherwise, terminate all commands or command strings by pressing <key>(RET).) <TABLE_ROW>(<BOX>(RETURN)\ <box>(RETURN) in the text represents the <emphasis>(RETURN\smallcaps) key.) <TABLE_ROW>(<BOX>(CTRL/<VARIABLE>(x))\ <BOX>(CTRL/<VARIABLE>(x)) indicates a control-key sequence. While pressing the <emphasis>(CTRL\smallcaps) key, press another key. For example: <BOX>(CTRL/C).) <ENDTABLE> <head1>(Associated Documents) <line> Basic Books <list>(unnumbered) <LE> <REFERENCE>(INT_book) <LE> <REFERENCE>(GUI_book) <LE> <REFERENCE>(KED_book) <LE> <REFERENCE>(KEDC_book) <LE> <REFERENCE>(sug_book) <LE> <REFERENCE>(MRM_book) <LE> <REFERENCE>(MAS_book) <LE> <REFERENCE>(MSG_book) <LE> <REFERENCE>(SRN_book) <ENDLIST> <line> Installation Specific Books <list>(unnumbered) <LE> <REFERENCE>(AUT_book) <LE> <REFERENCE>(INS_book) <LE> <REFERENCE>(SYG_book) <ENDLIST> <page> Programmer Oriented Books <list>(unnumbered) <LE> <REFERENCE>(SUM_book) <LE> <REFERENCE>(SML_book) <LE> <REFERENCE>(SSL_book) <LE> <REFERENCE>(SIM_book) <LE> <REFERENCE>(DEV_book) <LE> <REFERENCE>(VFF_book) <LE> <REFERENCE>(DBG_book) <ENDlist> <page> <preface_section>(New and Changed Features) <list>(unnumbered) <le>The <literal>(<)<emphasis>(jobs\smallcaps)>, <literal>(<)<emphasis>(mapped\smallcaps)>, and <literal>(<)<emphasis>(system\smallcaps)> special numeric symbols have been updated to include the RT--11 5.6 monitors. <LE> A new special logical symbol <literal>(<)<emphasis>(mode\smallcaps)> has been added to indicate if the current monitor supports mapping to Instruction and Data space. <endlist> See the <emphasis>(IND Reserved Symbols) section in Chapter 2 for a description of these symbols. <ENDPREFACE> <ENDFRONT_MATTER>