(RT--11 System Message Manual) <order_number>(AA--5284H--TC) <abstract>(August 1991) <line> This manual is for all RT--11 users. It provides a summary of error conditions that may occur during system use, along with recommended recovery procedures. <endabstract> <revision_info>(This manual supersedes <reference>(MSG_book) AA--5284F--TC.) <revision_info>(Operating System:\RT--11 Version 5.6) <endtitle_page> <copyright_page> <comment> This copyright page works. All you have to do is 1. Edit in the appropriate date in two places (at the print_date and at the copyright_date tags) 2. Put in your book ID number at the endcopyright_page tag. <endcomment> <COPYRIGHT_PAGE_FORMATTING>(CONTROLLED) <print_date>(First Printing, March 1980) <print_date>(Updated, March 1981) <print_date>(Revised, March 1983) <print_date>(Updated, July 1984) <print_date>(Revised, October 1985) <print_date>(Revised, August 1989) <PRINT_DATE>(Revised, August 1991) <line> The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227--7013. <copyright_date>(1980, 1981, 1983, 1984, 1985, 1989,1991\Digital Equipment Corporation) All rights reserved. Printed in U.S.A. The Reader's Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. The following are trademarks of Digital Equipment Corporation: CTS--300, DDCMP, DECnet, DECUS, DECwriter, DIBOL, MASSBUS, MicroPDP--11, Micro/RSX, PDP, Professional, Q-bus, RSTS, RSX, RT--11, RTEM--11, UNIBUS, VMS, VT, and the DIGITAL Logo. <vertical_space>(fill) <document_acknowledgment>(brief) <ENDCOPYRIGHT_PAGE>(S1438) <comment>(Place your LPN above) <contents_file> <preface>(5) <comment>(<preface_section>(Structure of This Manual)) <emphasis>(Structure of Manual\bold) <table> <table_attributes>(multipage) <table_setup>(3\3\22\) <table_heads>(\Chapter\Contents) <table_row>(\Chapter 1. <LINE>Using the RT--11 System <LINE>Message Manual\ <LIST>(UNNUMBERED) <LE>Organization and format of the RT--11 operating system error messages; the references contained in the messages <LE>Reporting error conditions you are unable to correct <LE>Guidelines for increasing system storage and memory resources <LE>Guidelines and instructions for diagnosing system failures <ENDLIST>) <Table_row>(\Chapter 2. <LINE>Hardware Errors\ <LIST>(UNNUMBERED) <LE>Summary of hardware problems <LE>Interpretation of errors; <LE>Recommended corrective procedures <LIST>(UNNUMBERED\--) <LE>Video and printer terminals <LE>line printers <LE>magtapes <LE>display processors <LE>disks <ENDLIST><ENDLIST>) <table_row>(\Chapter 3. <LINE>RT--11 System Messages\ List of diagnostic messages for programs in the RT--11 operating system.) <ENDTABLE> <PAGE> <EMPHASIS>(Summary of Changes\BOLD) <EMPHASIS>(New Error Messages\BOLD). Error messages added to <EMPHASIS>(Chapter 3. RT--11 Error Messages\ITALIC) pertain to LINK, SYSGEN, SYSMAC, VBGEXE, and to the Ethernet handlers. Some error message lists previously in this manual are now contained in separate documentation: <LIST>(UNNUMBERED) <LE>FORTRAN IV messages are now contained in the FORTRAN manual. <LE>BASIC--11 error messages are now contained in the BASIC--11 manual. <LE>MACRO--11 messages are now contained in the MACRO--11 manual. <LE>Editor Messages unique to a specific editor are now listed in the error message section of documentation for that editor. (SL and EDIT messages are listed alphabetically with the other system utility messages.) <ENDLIST> <endpreface> <endfront

DATE:20 JUNE 1991 This is the S681FM file, renamed S1438FM; very few additional messages (SYSGEN, LINK, Megan's); biggest change is reorganization into three chapters (front) (RT--11 System Message Manual) <order_number>(AA--5284H--TC) <abstract>(August 1991) <line> This manual is for all RT--11 users. It provides a summary of error conditions that may occur during system use, along with recommended recovery procedures. <endabstract> <revision_info>(This manual supersedes <reference>(MSG_book) AA--5284F--TC.) <revision_info>(Operating System:\RT--11 Version 5.6) <endtitle_page> <copyright_page> <comment> This copyright page works. All you have to do is 1. Edit in the appropriate date in two places (at the print_date and at the copyright_date tags) 2. Put in your book ID number at the endcopyright_page tag. <endcomment> <COPYRIGHT_PAGE_FORMATTING>(CONTROLLED) <print_date>(First Printing, March 1980) <print_date>(Updated, March 1981) <print_date>(Revised, March 1983) <print_date>(Updated, July 1984) <print_date>(Revised, October 1985) <print_date>(Revised, August 1989) <PRINT_DATE>(Revised, August 1991) <line> The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227--7013. <copyright_date>(1980, 1981, 1983, 1984, 1985, 1989,1991\Digital Equipment Corporation) All rights reserved. Printed in U.S.A. The Reader's Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. The following are trademarks of Digital Equipment Corporation: CTS--300, DDCMP, DECnet, DECUS, DECwriter, DIBOL, MASSBUS, MicroPDP--11, Micro/RSX, PDP, Professional, Q-bus, RSTS, RSX, RT--11, RTEM--11, UNIBUS, VMS, VT, and the DIGITAL Logo. <vertical_space>(fill) <document_acknowledgment>(brief) <ENDCOPYRIGHT_PAGE>(S1438) <comment>(Place your LPN above) <contents_file> <preface>(5) <comment>(<preface_section>(Structure of This Manual)) <emphasis>(Structure of Manual\bold) <table> <table_attributes>(multipage) <table_setup>(3\3\22\) <table_heads>(\Chapter\Contents) <table_row>(\Chapter 1. <LINE>Using the RT--11 System <LINE>Message Manual\ <LIST>(UNNUMBERED) <LE>Organization and format of the RT--11 operating system error messages; the references contained in the messages <LE>Reporting error conditions you are unable to correct <LE>Guidelines for increasing system storage and memory resources <LE>Guidelines and instructions for diagnosing system failures <ENDLIST>) <Table_row>(\Chapter 2. <LINE>Hardware Errors\ <LIST>(UNNUMBERED) <LE>Summary of hardware problems <LE>Interpretation of errors; <LE>Recommended corrective procedures <LIST>(UNNUMBERED\--) <LE>Video and printer terminals <LE>line printers <LE>magtapes <LE>display processors <LE>disks <ENDLIST><ENDLIST>) <table_row>(\Chapter 3. <LINE>RT--11 System Messages\ List of diagnostic messages for programs in the RT--11 operating system.) <ENDTABLE> <PAGE> <EMPHASIS>(Summary of Changes\BOLD) <EMPHASIS>(New Error Messages\BOLD). Error messages added to <EMPHASIS>(Chapter 3. RT--11 Error Messages\ITALIC) pertain to LINK, SYSGEN, SYSMAC, VBGEXE, and to the Ethernet handlers. Some error message lists previously in this manual are now contained in separate documentation: <LIST>(UNNUMBERED) <LE>FORTRAN IV messages are now contained in the FORTRAN manual. <LE>BASIC--11 error messages are now contained in the BASIC--11 manual. <LE>MACRO--11 messages are now contained in the MACRO--11 manual. <LE>Editor Messages unique to a specific editor are now listed in the error message section of documentation for that editor. (SL and EDIT messages are listed alphabetically with the other system utility messages.) <ENDLIST> <endpreface> <endfront_matter>