... Client / Server Program Options
Special Printing Client Program NTSND is a program for transferring data to a remote printer without any translation (good for binary files). This program supports products such as the Emulex NETJET for the HP 4Si/Mx printer. The command options are: NTSND [?] [-inpq argument] file [file [...]] ? List the Help Text and Exit NTSND i IP Address Remote Server Name / IP Address n Port Number Remote Server Port Number p filespec Password File q Query for File Name The NTSND program is invoked from the command file NTSND.COM: run/single TCP:ntsnd -bp PAS:/paswrd/paswrd.fil ^1 ^2 ^3 ^4 ^5 ^6=> Section Index
HTTP Server Program RHTTP is an HTTP/0.9 server supporting only simple request and response formats for GET, HEAD, and POST methods. The POST method always responds as unimplemented. HTTP transfers are always in BINARY format except for files of type HTM, DOC, TXT, and LST which are in ASCII format. The command options are: RHTTP [?] [-p filespec] [-z s] [-aerv] ? List the Help Text and Exit RHTTP a Attach to Service e Enable Monitoring of all RHTTP Transactions p Specify the HTTP Directory and Home File r Restart RHTTP after Disconnect v Verbose Mode z s Inactivity Timeout in seconds The HTTP directory and home file must be specified, using the -p option. The directory path is used as the base directory for all HTTP accesses. The program may be started interactively (for diagnostic pur- poses) by the command file RHTTP.COM: mount ld0: dl1:http.dsk assign ld0: HTP: run/single TCP:rhttp -rspz 1 2 HTP:/home.htm 30 ^1 ^2 ^3 ^4 ^5 ^6 The program is normally invoked by the TCPIP network server pro- gram by the command file RHTTP.SRV: deassign dismount ld0: dismount ld1: dismount ld2: dismount ld3: dismount ld4: dismount ld5: dismount ld6: dismount ld7: assign sy: wf: mount ld0: dl1:http.dsk assign ld0: HTP: mount ld7: dl1:tsxtcp.dsk assign ld7: TCP: run/single TCP:rhttp -aspz 1 2 HTP:/file.ext 30 NOTE The slashs, /.../, are required to delimit the HTTP base directory. If a device or (logical) device specification is used, HTP:, then the slash is re- quired after the colon. All accesses to files outside the http directory are not per- mitted and are reported as unauthorized. Absolute references are not allowed (e.g. dl1:/http.dsk/file.ext) even if they are in the http directory, these are also reported as unauthorized. Use only relative paths in file specifications to the http directory and subdirectories (e.g. /subdir/file.ext). These requirements provide the most security for http requests which require no password authentication. The home file is an HTML file and should be written to re- flect the functionality of the browsers you wish to support with this http server.=> Section Index
Gopher Server Program RGOPH is a simple Gopher server supporting transfers of text, binary, and image files and linking to other network resources using basic ASCII text constructs. The command options are: RGOPH [?] [-p filespec] [-z s] [-aerv] ? List the Help Text and Exit RGOPH a Attach to Service e Enable Monitoring of all RGOPH Transactions p Specify the Master GOPHER File r Restart RGOPH after Disconnect v Verbose Mode z s Inactivity Timeout in seconds The Gopher master file must be specified, using the -p option. The master file contains the access specifications for the go- pher server. The format of the master file is described in the file RGOPH.CFG and included here for reference: # # This is the Master Gopher List # # Each entry has the following format: #<code><TAB>description # <TAB>file or list specification # <TAB>machine name or IP address # <TAB>port number # # End list with '.' and <CRLF> # # Common item types specified by <code> are: # # 0 item is a file # 1 item is a directory # 2 item is a CSO phone-book server # 3 Error # 4 item is a NINHEXed MacIntosh file # 5 item is DOS archive of some sort # 6 item is a UNIX uuencoded file # 7 item is an Index-Search server # 8 item points to a text-based telnet server # 9 item is a binary file # + item is a redundant server # T item points to a text-based TN3270 session # g item is a GIF format graphics file # I item is some kind of image file # # All references are described in RFC1436 # The master list contains file and list references which denote a tree structure of accessible resources. A typical master list is shown here to clarify the specification. The top level follows: 0 About This GOPHER Site sy2:/gopher.dsk/rgoph.doc shop-pdp.kent.edu 70 1 TCP/IP Package For TSX-Plus, ... List1/ shop-pdp.kent.edu 70 1 ASxxxx Assemblers and Linker List2/ shop-pdp.kent.edu 70 . The 'List1/' (<code> = 1) specification indicates this is a directory of subitems: # # Elements of List1/ # List1/ 0 Abstract [2K] sy3:/tcpip.pkg/abstra.doc shop-pdp.kent.edu 70 0 Documentation [158K] sy3:/tcpip.pkg/manual.doc shop-pdp.kent.edu 70 9 Minimal Package, Logical Disk Image, [300K] sy3:/tcpipm.dsk shop-pdp.kent.edu 70 9 Complete Package, Multilevel Logical ... sy3:/tcpip.pkg/tcpip.dsk shop-pdp.kent.edu 70 9 Disk1 of Package, RX02 Image [494K] sy3:/tcpip.pkg/tcpip.dsk/disk1.dsk shop-pdp.kent.edu 70 9 Disk2 of Package, RXO2 Image [494k] sy3:/tcpip.pkg/tcpip.dsk/disk2.dsk shop-pdp.kent.edu 70 9 Disk3 of Package, RXO2 Image [494k] sy3:/tcpip.pkg/tcpip.dsk/disk3.dsk shop-pdp.kent.edu 70 9 Disk4 of Package, RXO2 Image [494k] sy3:/tcpip.pkg/tcpip.dsk/disk4.dsk shop-pdp.kent.edu 70 9 Disk5 of Package, RXO2 Image [494k] sy3:/tcpip.pkg/tcpip.dsk/disk5.dsk shop-pdp.kent.edu 70 9 Disk6 of Package, RXO2 Image [494k] sy3:/tcpip.pkg/tcpip.dsk/disk6.dsk shop-pdp.kent.edu 70 9 Disk7 of Package, RXO2 Image [494k] sy3:/tcpip.pkg/tcpip.dsk/disk7.dsk shop-pdp.kent.edu 70 9 Documentation Source, RX02 Image [494K] sy3:/tcpip.pkg/tcpip.dsk/tcpdoc.dsk shop-pdp.kent.edu 70 9 Current Updates, Logical Disk Image [988K] sy3:update.dsk shop-pdp.kent.edu 70 . The 'List2/' (<code> = 1) specification indicates the presence of a second directory of available resources: # # Elements of List2/ # List2/ 1 ASxxxx for PDP-11 and LSI-11 Computers List2.1/ shop-pdp.kent.edu 70 1 ASxxxx for PC Compatible Computers List2.2/ shop-pdp.kent.edu 70 . These elements also contain references to additional subdirec- tories of resources. Nesting to any level may be accomplished using this syntax. Ensure that all subdirectory references have unique names. The use of 'xxxxx/' is not required, any unique character string may be used to reference a subdirectory entry. The program may be started interactively (for diagnostic pur- poses) by the command file RGOPH.COM: run/single TCP:rgoph -rsp 0 4 TCP:rgoph.cfg ^1 ^2 ^3 ^4 ^5 ^6 The program is normally invoked by the TCPIP network server pro- gram by the command file RGOPH.SRV: deassign dismount ld0: dismount ld1: dismount ld2: dismount ld3: dismount ld4: dismount ld5: dismount ld6: dismount ld7: assign sy: wf: mount ld6: dl1:paswrd.dsk assign ld6: PAS: mount ld7: dl1:tsxtcp.dsk assign ld7: TCP: run/single TCP:rgoph -aspz 0 4 TCP:rgoph.cfg 600=> Section Index
... Exit TCP/IP Documentation
... Home Page